Toothed Belt Tension Roller, Remove and Install (X 16 SZR)
Remove, Disconnect
Remove toothed belt - see operation "Toothed Belt, Remove and Install (X 16 SZR)".
Remove toothed belt tension roller from oil pump.
Install, Connect
Install toothed belt tension roller - ensure that tongue (1) of the toothed belt tension roller base plate engages in bore (2) of the oil pump.
Important!
Before tightening the toothed belt tension roller: turn lug (1) of toothed belt tension roller to the stop (2) on the oil pump.
Attach toothed belt tension roller to oil pump - tightening torque 20 Nm / 15 lbf. ft.
Install toothed belt - see operation "Toothed Belt, Remove and Install (X 16 SZR)".