vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

B-05, F7: PROGRAMMING Test Step T01 PROGRAM R-KEY > < B-04, F5: ACTUATOR TEST Test Step T06 S.ROOF/WINDOW

 

 

 

 

B-04, F5: ACTUATOR TEST  

Test  

Work Order Description  

Nominal Value  

T07  

Tester Display  

THEFT LED  

 

 

•  Ignition OFF  

•  All doors/trunk/tailgate and engine hood closed  

Car key in driver door turned 30 ° to the left  

Anti-theft warning system/central door locking system disarmed  

•  Press corresponding key in the system main menu to call up Actuator Test functions, select the desired test and confirm with YES. Follow the instructions in the diagnostic tester display.  

•  After the test is started, the corresponding component can be actuated using the CURSOR keys.  

Theft Light Emitting Diode (LED) is switched on and off  

 

Note:  

The test is completed after a maximum of 30 s.  

The direction in which the car key is turned refers to a vehicle with left hand drive. On vehicles with right hand drive the car key must be turned in the opposite direction.  

To protect the motors against overheating problems caused by permanent operation, an overload protection is activated. While the overload protection is active, all motor functions are blocked.  

 

 

Concerned Terminals:  
25 (28p)  
 
 
 

 

 

Yes: -  

No: C-24  

 


Related Literature Units
-
-

B-05, F7: PROGRAMMING Test Step T01 PROGRAM R-KEY > < B-04, F5: ACTUATOR TEST Test Step T06 S.ROOF/WINDOW