C-11, Tailgate contact switch circuit |
Test |
Instructions |
Nominal value |
T01 |
Measure resistance |
|
|
• Disconnect wiring harness plug from anti-theft warning system control unit & central door locking K94 (28 pin) • Open tailgate • Measure resistance between wiring harness plug K94/terminal 17 and ground |
Lower than 2 Ω |
|
Yes: T02 |
No: T03 |
T02 |
Measure resistance |
|
|
• Disconnect wiring harness plug (28 pin) from anti-theft warning system control unit & central door locking K94 • Remove load compartment lamp/luggage compartment lamp bulb • Close tailgate • Measure resistance between wiring harness plug K94/terminal 17 and ground |
Greater than 100 k Ω |
|
Yes: E04 |
No: T05 |
T03 |
Measure resistance |
|
|
• Disconnect wiring harness plug (28 pin) from anti-theft warning system control unit & central door locking K94 • Measure resistance between wiring harness plug K94/terminal 17 and tailgate contact switch |
Lower than 2 Ω |
|
Yes: T04 |
No: E01 |
T04 |
Measure resistance |
|
|
• Measure resistance between tailgate contact switch, brown lead, and ground |
Lower than 2 Ω |
|
Yes: T05 |
No: E02 |
T05 |
Visual check |
|
|
• Check contact switch for damage |
Determination O. K. |
|
Yes: E04 |
No: E03 |