Vectra B
Check Control - Incorrectly reports low coolant level
Models: Vectra-B 96...
Engines: All
Option:
Group: N - Electrical Equipment
Troublecode: Non
Complaint: Wrong Indication Check-control incorrectly reports low coolant level.
Cause: Sensor in coolant reservoir defective.
Special part: No
Production Solution:
Remedy: Perform instructions below.
Operation:
Check the sensor for electrical continuity (= 0 Ohm). Check the plug and cable for continuity.
If the sensor is defective the coolant reservoir with sensor must be replaced (in case of welded in sensor).
Cat /part No. 13 04 209 /(90 499 767).
Coolant reservoirs without welded in sensor: Replace only the sensor.
Cat/part No. 13 04 218/(90 542 964).
|