Centre Brake Lamp, Remove and Install - Model F35
Remove, Disconnect
Remove upper tailgate inner panelling - see operation "Inner Panelling - Tailgate, Remove and Install - Model F35" in group "C".
Carefully release and detach centre brake lamp (1) (arrows).
Carefully release and disconnect housing (2).
Unclip LED printed circuit board and detach wiring harness plug (4).
Install, Connect
Connect wiring harness plug (4), clip in LED printed circuit board (3) and attach housing (2).
Clip in centre brake lamp (1), attach inner panelling for upper tailgate.
Remove, Disconnect 
Install, Connect 