vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Low Beam Range Control Unit > < Economy/Sport Program Tip Switch, Remove and Install

Vectra B

 

Turn Signal Switch, Remove and Install  

Screen Wiper Switch, Remove and Install  

Illustration shows turn signal switch.  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Unbolt signal switch panelling (5 bolts), release signal switch and remove from steering pillar, and release and disconnect wiring harness plug. With cruise control, release and disconnect additional wiring harness plugs.  

Wiper switch is removed analogously.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Connect all wiring harness plugs, clip in signal switch, and install signal switch panelling.  

Object Number: 616201 Size: DEFAULT  Important!   

Ensure correct insertion in guide rails on both sides.  

Snap-in clips must audibly engage.  

Object Number: 2400166 Size: DEFAULT

Low Beam Range Control Unit > < Economy/Sport Program Tip Switch, Remove and Install