vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Contact Part for Steering and Ignition Lock, Replace > < Signal Lever Does not Re-engage Autom. in Zero Position. Switch is OK

Vectra B

 

Steering and Ignition Lock  

Lock Cylinder for Steering and Ignition Lock, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove signal switch panelling - 5 bolts (arrows). Ignition key in "I" position, release lock cylinder and pull out in direction of arrow.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Insert lock cylinder, and install signal switch panelling.  

Object Number: 616201 Size: DEFAULT  Important!   

Object Number: 2395833 Size: DEFAULT

If steering lock pin engages, press down lock stone (1) with a screwdriver until retaining pin (2) engages.  

Object Number: 2388861 Size: DEFAULT

 

 

Contact Part for Steering and Ignition Lock, Replace > < Signal Lever Does not Re-engage Autom. in Zero Position. Switch is OK