Disconnect battery ground - remove battery if necessary. Remove cover from positive distribution. Illustration (I) shows positive distribution without cover. Remove all fuses. Withdraw individual blocks (1, 2, and 3) consecutively upwards out of block (4) (II). Release and remove housing (4) from bracket together with block (III). Remove block (4) from housing. Unscrew positive connection (5) from battery positive terminal.
Install, Connect Connect positive terminal to battery - install battery if necessary. Clip block (4) into housing, clip housing onto bracket. Insert blocks (1, 2 and 3) in block (4). Insert fuses - installation site, see circuit diagram TI. Install cover, connect battery ground. |
|