Remove tailgate inner panelling - see operation "Tailgate Inner Panelling, Remove and Install, Model F35" in group "C". Release and disconnect rear body wiring harness plug for tailgate (3). Remove cable ties. Unbolt ground cable (4). Disconnect following wiring harness plugs: Heated rear screen (1), centre brake lamp (2), lamp switch for load compartment (7), licence plate lamp (8), wiper motor (9), central locking drive (5), switch for anti-theft warning system (7). Withdraw wiring harness.
 Install, Connect Draw wiring harness in tailgate and route, and fasten with cable ties. Connect all wiring harness plugs, bolt ground cable and install tailgate inner panelling. | 
|
Remove, Disconnect