Vauxhall Workshop Service and Repair Manuals

Control Unit / Actuator, Remove and Install (X 25 XE)  

Notice: 

The control unit of the electronic cruise control is integrated in the actuator.  

  Remove, Disconnect   

Detach cruise control Bowden cable on throttle body and remove from Bowden cable bracket - see operation "Bowden Cable Cruise Control, Remove and Install"   Remove hydraulic modulator - see operation "Hydraulic Modulator with ABS Control Unit, Remove and Install (Vehicles with ABS 5/TC)" in group "H".   Remove hydraulic modulator bracket from body.   Only release fastening nut (3) and remove fastening nuts (2).   Detach actuator bracket from side member.   Disconnect wiring harness plug (1) from control unit.   Detach actuator bracket from actuator (3 fastening bolts).

  Remove, Disconnect   

Remove actuator with cruise control Bowden cable.   Disconnect cruise control Bowden cable from actuator by turning guide tube (1) 1/4 turn to left.   Detach cruise control Bowden cable from actuator (arrow).

  Install, Connect   

Attach cruise control Bowden cable to actuator and screw to actuator with 1/4 turn to right.  

Insert actuator with cruise control Bowden cable. Attach actuator bracket to actuator (3 fastening bolts).  

Connect actuator to side member - 3 fastening nuts. Connect wiring harness plug to actuator.  

Attach hydraulic modulator bracket to body.  

Install hydraulic modulator - see operation "Hydraulic Modulator with ABS Control Unit, Remove and Install (vehicles with ABS 5/TC)" in group "H".  

Attach cruise control Bowden cable in Bowden cable bracket and to throttle body - see operation "Bowden Cable Cruise Control, Remove and Install".  

  Inspect   

Check cruise control Bowden cable setting - see operation "Cruise Control Bowden Cable, Adjust".