Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-428002.png)
New: 0.03 to 0.08 mm Wear limit: 0.17 mm
^
Do not rotate crankshaft when checking radial clearance
^
Crankshaft dimensions, Refer to Crankshaft, Specifications
10. Thrust washer
^
For engine block, bearing 3
Fig. 1 Crankshaft dowel pin projection, checking
Dowel pin projection -3- out of crankshaft a = 2.5 to 3.0 mm
