Beetle L4-1781cc 1.8L Turbo (APH) (1999)
14. 15 Nm
15. 20 Nm
16. 90 Nm + 1/4 turn (90°) further
Always replace
Counter-hold with 3099 to loosen and tighten
When bolting on, place two washers between toothed belt pulley and counter-hold
17. Toothed belt guard - lower part
18. 10 Nm
Insert with locking fluid D 000 600 A2
19. Pulley
For power assisted steering pump
20. 25 Nm
21. Ribbed belt
Mark direction of rotation before removing
Removing and installing, refer to Engine, Cooling and Exhaust - Engine - Drive Belt, Mounts, Brackets and Accessories - Drive Belt -
Service and Repair - Procedures See: Drive Belts, Mounts, Brackets and Accessories/Ribbed Belt/Service and Repair
22. 25 Nm
23. Belt - pulley/vibration damper
Can only be installed in one position (holes are oftset)
Note position when installing toothed belt