volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Generic Scan Tool|Page 4081 > < With Generic Scan Tool|Page 4079
Page 5
background image

-

Connect test box V.A.G 1598/31 to control module wiring harness. The engine control module is not connected by this action.

-

Check wiring for open circuit between test box and connector contacts:
-

Contact 1 + Socket 92

-

Contact 2 + Socket 83

-

Contact 3 + Socket 117

-

Contact 4 + Socket 84

-

Contact 5 + Socket 118

-

Contact 6 + Socket 91 

Wire resistance: max. 1.5 Ohms

-

Additionally check wires for short to one another.
Specification: Infinity Ohms

-

Check wiring additionally for short circuit to battery positive or Ground. 
Specification: Infinity Ohms

If no wiring problem is detected:

-

Check Engine Control Module (ECM) voltage supply. 

With Generic Scan Tool|Page 4081 > < With Generic Scan Tool|Page 4079