volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 4840 > < With Manufacturer's Scan Tool|Page 4838
Page 4
background image

-

Open pressure tester V.A.G 1318 shut-off tap (handle in through-flow direction).

-

Start the engine and run at idle speed.

-

Switch ignition off after the pressure has built-up. At the same time pinch/seal the return hose together.

If the pressure does not drop:

-

Replace fuel pressure regulator, item 4.

If the pressure drops again:

-

Check pipe connections, O-rings on fuel manifold and injectors for leaks.

-

Check pressure gauge for leaks.

NOTE:  Before removing pressure gauge place a cloth around the connections to be loosened.

With Manufacturer's Scan Tool|Page 4840 > < With Manufacturer's Scan Tool|Page 4838