volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 3096 > < With Manufacturer's Scan Tool|Page 3094
Page 5
background image

-

Pull the 4 pin connector off Engine Coolant Temperature (ECT) sensor (G62) with coolant temperature gauge sender (G2) - arrow-.

-

Check wire for open circuit between test box and 4-pin connector using wiring diagram.

-

Contact 1 + Socket 108

-

Contact 3 + Socket 93
Wire resistance: max. 1.5 Ohms

-

Check wire for short circuit between test box and 4-pin connector contact 1 to wire contact 3 and to vehicle Ground using wiring diagram.
-

Contact 3 + socket 108

-

Contact 3 + vehicle Ground
Specification: Infinity Ohms

-

Additionally check both wires for short to battery positive. 
Specification: Infinity Ohms

If no wiring malfunctions are detected:

With Manufacturer's Scan Tool|Page 3096 > < With Manufacturer's Scan Tool|Page 3094