Beetle L4-1781cc 1.8L Turbo (APH) (1999)
-
Connect multimeter to measure voltage on connector contact 4 and engine Ground.
-
Switch on ignition.
Specification: min. 4.5 V
If no voltage is present:
-
Switch off ignition.
-
Check the signal and Ground wires.
Testing signal and Ground wires for Mass Air Flow (MAF) sensor
-
Remove inner plenum chamber cover, left:
-
Connect test box V.A.G 1598/31 to control module wiring harness. The engine control module is not connected by this action.