Beetle L4-2.0L (AEG) (2000)
-
Grind off remaining material of pins to secure door storage compartment - 1 - far enough until old door storage compartment with net can be
removed. Remaining part of pins is used to secure new door storage compartment. Therefore, do not remove pins completely!
-
Remove protective padding - 2 - (only if necessary). In this case, protective padding must be replaced.
NOTE: Removing protective padding - 2 - may be necessary if bonding of protective padding - 2 - also covers door storage compartment - 1 - or
securing pins of door storage compartment - 1 - are not accessible.
-
Remove outrigger - 2 - from bracket - 1 - if present. (New bracket are manufactured without outrigger.)
-
Attach new door storage compartment - 1 - with net to bracket - 2 -.
Drill four holes in door trim to secure bracket to door trim.
-
To mark positions for holes, attach bracket - 1 - with door storage compartment - 2 - to door trim - 3 -.