Beetle L4-2.0L (AEG) (2000)
Only PTFE oil seals
Special tools and equipment
^
2085 Seal puller - general usage
^
3415 Counter support
^
T10071 puller
^
VAG1331 Torque wrench 5 to 50 Nm (3 7 to 37 ft. lbs.), or equivalent
^
VAG1332 Torque wrench 40 to 200 Nm (30 to 148 ft. lbs.), or equivalent
Removing
All oil seals
-
Remove camshaft drive belt guard - upper section.
-
Set camshaft sprocket to cyl. 1 TDC by turning crankshaft.
^
Mark on camshaft sprocket must align with arrow on cylinder head cover.
-
Release tensioning roller and take toothed belt off camshaft sprocket.
-
Turn crankshaft back slightly.