Beetle L4-2.0L (AEG) (2000)
Dome Lamp Switch: Service and Repair
Removing
-
Turn rotary knob of light switch to "0" position.
-
Press rotary knob inward (arrow-i-) and turn slightly to right (arrow -2-).
-
Hold rotary knob in this position and by pulling on rotary knob remove light switch out of instrument panel (arrow -3-).
-
Disconnect harness connector.
Installing
-
Connect harness connector.
-
Hold light switch and press rotary knob inward (arrow -1-) and turn slightly to left (arrow -2-).
-
Hold rotary knob in this position and slide light switch into instrument panel.
-
Turn rotary knob to "0" position, release and engage switch.