volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Camshaft Position Sensor > < Brake Signal|Testing and Inspection
Page 2
background image

If specification not obtained

-

Connect VAG 1598/22 Test Box to ECM harness connector.

-

Check wiring for open circuit between Test Box and 4-pin harness connector using Wiring diagram.
-

Terminal 3 + socket 48

-

Terminal 4 + socket 47
Wire resistance: 1.5 Ohms maximum

If specification obtained

-

Check wiring for open circuit between 4-pin harness connector terminals 1 + 2 and fuel pump relay using Wiring diagram.

Camshaft Position Sensor > < Brake Signal|Testing and Inspection