Beetle L4-2.0L (AEG) (2000)
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Switch OFF ignition.
If specification not obtained
-
Connect VAG 1598/22 Test Box to Control Module wiring harness.
-
Check wiring for open circuit between Test Box socket 48 and 2-pin harness connector terminal 1 using wiring diagram.
-
Wire resistance: 1.5 Ohms maximum
If specification obtained, check wiring for open circuit between 2-pin harness connector terminal 2 and fuel pump relay using wiring diagram.