Beetle L4-2.0L (AEG) (2000)
If specifications obtained
-
Press -> button.
Rapid data transfer
HELP
Select function XX
Display will appear as shown
-
Press 0 and 6 buttons to select Function 06: "End output."
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Display Readiness code. Refer to "Monitors, Trips and/or Drive Cycle (Readiness Codes)/Displaying Readiness Code", See: Testing and
Inspection
If DTC memory has been erased or ECM was disconnected from Battery + :
-
Set Readiness code. Refer to "Monitors, Trips and/or Drive Cycle (Readiness Codes)/Setting Readiness Code", See: Testing and Inspection
Display group 22/23, evaluating