volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Air Bag Control Module > < Air Bag MIL ON, DTC 00588 (Resistance Too Low) Set|Page 7674
Page 1
background image

Air Bag Harness: All Technical Service Bulletins
Airbag Units - Replacing Following Deployment

Group: 69

Number: 99-02

Date: June 17, 1999

Subject:
Airbag units, replacing following deployment

Model(s):
All

1990 --> 2000

Service

Wiring harnesses in seat for airbag must be replaced if airbag unit in seat is deployed. The list below summarizes all components that must be replaced
following airbag deployment.

Always replace the following:

^

All triggered airbag units

^

All control modules for triggered airbags

^

All sensors for triggered airbags

^

All seat belts with triggered belt tensioners

^

Support for front passenger airbag unit, if unit is triggered

^

Airbag spiral spring / Return spring with slip ring -F138- for driver's airbag, if unit is triggered

^

All airbag wiring harnesses for side airbag in seat, if unit is triggered

^

Seat cover and cover clips, if side airbag is triggered

^

Visually check and replace: All damaged components

Note:

When replacing either an airbag unit or airbag control module, see your parts department for proper registration procedure.

Air Bag Control Module > < Air Bag MIL ON, DTC 00588 (Resistance Too Low) Set|Page 7674