Beetle L4-2.0L (AEG) (2000)
-
Two different belt tensioners are installed: Electrical belt tensioners in vehicles with side airbags and technicianal belt tensioners in
vehicles without side airbags
CAUTION: Observe safety precautions for belt tensioners.
-
Disconnect battery before removing seatbelt with electrical belt tensioner
-
To remove, side trim must be removed first.
-
Retaining tab determines position of automatic belt retractors
-
Observe safety precautions for belt tensioners.
13
-
Connector
-
only with electrical belt tensioners
CAUTION: Electrostatic charges may result in involuntary deployment of the belt tensioner. Therefore, the technician must be
electrostatically discharged before disconnecting ignition- and Ground (GND) wires. This is done e.g. by briefly grasping the
chassis or door striker.
14
-
Phillips-head screws
-
1.5 Nm
15
-
Belt guide
-
Secured with 2 Phillips-head screws