volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Technician Safety Information|Page 6634 > < Technician Safety Information
Page 1
background image

Battery: Vehicle Damage Warnings

Handling Instructions

Handling instructions

CAUTION!
Before beginning repairs on the electrical system:

-

Obtain the anti-theft radio security code.

-

Switch the ignition off.

-

Disconnect the battery Ground (GND) strap.

-

After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.

NOTE:

-

Battery posts and terminals must no longer be greased.

-

In order to prevent damage to the battery housing, battery terminals must be placed on battery posts without using force (by hand only).

-

Battery post/terminal nut -arrow tightening torque: 5 Nm (44 in lb)

-

Additional battery post/terminals, tightening torque: 6 Nm (53 in lb).

Batteries With Central Gas Venting

Batteries with central gas venting

Batteries with two different styles of central gas venting are installed:

-

Batteries with central gas vent hose

-

Batteries without central gas vent hose

CAUTION!

-

Only new generation batteries with central gas venting are to be installed!

-

For proper function of central venting and flame trap, check vent hose (where applicable) for proper installation. Vent hose must NOT be
disconnected or pinched.

-

Only the use of genuine VW battery cell caps ensures the different battery cover systems are sealed correctly.

-

Only use genuine VW cell caps of the same construction if lost or damaged.

-

Caps must be fitted with an O-ring seal.

Technician Safety Information|Page 6634 > < Technician Safety Information