volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Input Shaft, M/T > < Fluid - M/T|Capacity Specifications|Page 5973
Page 1
background image

Fluid - M/T: Service and Repair

5 Speed Manual 02J

Checking Transmission Oil

- Remove sound insulation tray below engine/transmission, if installed.

- Remove plug (arrow) to check oil

The oil level is correct when the transmission is full to the lower edge of the filler hole.

- Top up gear oil if necessary and reinstall plug (arrow).

When filling with new oil note following: 
-

Remove plug (arrow).

-

Top up oil to lower edge of filler hole.

-

Install plug (arrow).

-

Start engine, engage gear and allow transmission to turn for approx. 2 minutes.

-

Switch off engine and remove plug (arrow).

-

Top up oil to lower edge of filler hole again.

-

Install plug (arrow).

Input Shaft, M/T > < Fluid - M/T|Capacity Specifications|Page 5973