Beetle L4-2.0L (AEG) (2000)
Front Final Drive: Service and Repair
Differential, Adjusting
5 Speed Manual 02J
Differential, adjusting
Special tools
-
VW 387 Dial gauge holder
-
VW 385/17 End measuring plate
-
30-205 Thrust pad
-
VW 407 Punch
-
Dial indicator
The differential must be adjusted when
-
Transmission housing
-
Clutch housing
-
Differential housing
or the
-
Differential tapered roller bearing have been replaced.
Adjustment overview.
-
Press tapered roller bearing outer race into clutch housing using thrust pad 30-205.
Note:
The tapered roller bearing inner and outer races are paired. Do not interchange!
-
Press tapered roller bearing outer race without shim into transmission housing using thrust piece 30-205.
-
Mount differential into clutch housing
-
Install transmission housing.
Tightening torque: 25 Nm (18 ft. lbs.)