Beetle L4-2.0L (AEG) (2000)
-
Turn housing -1- right (clockwise as far as possible).
-
Tighten selector mechanism bolts to 25 Nm. (18 ft. lb.).
Vibration/knocking from 2nd or 4th gear:
-
Loosen selector mechanism.
Illustration shows selector mechanism housing with shaft and cables removed.
-
Turn housing -1- left (counter clockwise as far as possible).
-
Tighten selector mechanism bolts to 25 Nm. (18 ft. lb.).
-
Road test vehicle.
-
If minor vibration/knocking is still present, readjust selector shaft housing (see previous steps).
Warranty
Required Parts and Tools
Tip: Part number(s) are for reference only. Always see ETKA for the latest part(s) information.