Cabrio L4-2.0L (ABA) (1996)
-
Remove three screws (arrows) from carrier plate.
-
Remove carrier plate from side panel.
-
Disconnect connector.
Installing:
-
Installation is reverse of removal.
Two Door Vehicles
Right Front Tweeter -R22-
Removing:
-
Using screwdriver, carefully pry up speaker cover (arrows).
-
Carefully pry out tweeter mounting base.
-
Remove connector.
Installing:
-
Install in reverse order of removal noting installation marks on speaker.
Left Front Tweeter -R20-
Removing:
-
Using screwdriver, carefully pry up speaker cover (arrows).
-
Carefully pry out tweeter mounting base.
-
Remove connector.
Installing:
-
Install in reverse order of removal noting installation marks on speaker.
Rear Woofer
Removing:
-
Using screwdriver, carefully pry off speaker cover.
-
Remove four screws and pull speaker from side panel.