Cabrio L4-2.0L (ABA) (1996)
-
Install retaining strip/weather seal.
-
Bond front seal - 1 - to roof frame using two-sided tape.
-
Install rivet - 4 -, insert clips - 3 -, bolt on retaining rail - 2 - and install seal - 1 - onto retaining rail.
NOTE: Two-sided tape is used as an adhesive on retaining rail - 2 -.
-
Align rear window frame parallel to corner bow.
-
Clamp wooden block - 1 - (approx. 70 mm x 20 mm, length approx. 460 mm) between rear window frame - 2 - and corner bow - 3 -.
-
Close convertible top.
NOTE: Convertible top cover must lie against rear window frame around perimeter.