Cabrio L4-2.0L (ABA) (1996)
/Page-2028007.png)
-
Secure convertible top cover (first in radius - arrows - ) to rear window frame using steel clips (8 mm, rust resistant). Perform check measurements
between rear window frame and cross-seam of convertible top fabric.
NOTE: Do not cut convertible top cover before stapling to rear window frame.
-
Cut convertible top cover flush along window flange - arrows -
-
Install rear window and also seal off all around using D 469 101 A3.
NOTE: Any wrinkles formed can be eliminated by heating convertible top cover using a hot air gun.
