Cabrio L4-2.0L (ABA) (1996)
-
Press new pump wheel - 1 - onto drive shaft - 2 -.
NOTE: Pump wheel fits only in one position on drive shaft.
-
Pull off old O-ring - 4 - from hydraulic pump - 5 - and replace with new O-ring.
-
Position motor - 1 - with new pump wheel - 3 - onto hydraulic pump - 5 - and install with new bolts - 2 - (bolts are micro-encapsulated, tightening
torque 5 Nm).
-
Install and bleed hydraulic unit.