Cabrio L4-2.0L (ABA) (1996)
Intake Air Plenum: Locations
Intake Manifold, Upper Section, Exploded View
NOTE: All components marked with an asterisk (*) are checked via the On-Board Diagnostic System.
Intake Manifold, Upper Section, Exploded View.
1
M6:10 Nm (7 ft lb)
M8:20 Nm (15 ft lb)
2
Throttle valve control module J338-*
-
If replaced, "Basic Setting" function 04 must be initiated.
Components of throttle valve control module -J338-:
-
Throttle Position (TP) actuator -V60-
-
Throttle Position (TP) sensor -G88-
-
Throttle Position (TP) sensor -G69-
-
Closed Throttle Position (CTP) switch -F60-
3
Retainer
4
Support bracket
-
For accelerator pedal cable.
5
Intake Air Temperature (IAT) sensor -G72- *
-
10 Nm (7 ft lb).
6. Intake manifold, upper
7. Gasket
-
Always replace.