Cabrio L4-2.0L (ABA) (1996)
Evaporator Temperature Sensor / Switch: Service and Repair
Removing and installing A/C evaporator temperature switch -E33-
1 - A/C evaporator temperature switch -E33- and cover
2 - Rubber grommet
3 - Sensor tube and tape
Install tape on sensor tube 330 mm (13.0 in.) from end to mark insertion depth of tube into evaporator
4 - Self-tapping screw
5 - Wire connector
Note:
Wire connector -5- can temporarily be bridged during troubleshooting procedures.