Cabrio L4-2.0L (ABA) (1996)
/Page-2186001.png)
Quarter Window Regulator: Service and Repair
Electric Window Regulator, Removing And Installing
Removing
-
Unclip side window from window regulator - arrow -.
-
Push side window upward and secure (e.g. using adhesive tape).
-
Lower window regulator completely.
-
Disconnect harness connector from window regulator motor.
-
Remove window regulator.
-
Remove window regulator - 1 - downward in direction of - arrow -.
Installing
-
Installation is reverse order of removal.
NOTE: After installing, check side window adjustment.
