Cabrio GLX L4-2.0L (ABA) (2001)
Trim Panel: Service and Repair
Side Trim, Removing and Installing
Side Trim, Removing And Installing
Removing
-
Open convertible top as far as shown - in illustration -.
-
Remove ball pin - 1 - and screw - 2 -.
-
Remove cover - 3 - and lower convertible top completely.
-
Remove rear seatbench.
-
Remove backrest lower section.
-
Remove bolts - 1 -, remove backrest upper section - 2 - upward and place on opened convertible top.
-
Remove clip - 1 - and pull door sill molding - 2 - upward out of clamps - 3 -.
-
Remove window crank
-
Remove clip - 1 - and pry out clips - 2 -.