Cabrio GLX L4-2.0L (ABA) (2001)
Door Lock Cylinder: Removal and Replacement
Lock Cylinder With Inner Profile Keys, Removing And Installing
Removing
-
Remove door handle.
-
Clamp door handle at ignition key in a vise with protective pads.
-
Push down paddle - 1 - in direction of - arrow -.
-
Pull out locking washer - 2 -.
-
Remove paddle and spring.
-
Remove mount - 1 - and coupling plate - 2 - from lock cylinder housing.
-
Rotate lock cylinder - 1 - about 90 °.
-
Make sure that lock cylinder sleeve - 2 - does not turn with it.