Cabrio GLX L4-2.0L (ABA) (2001)
/Page-1720003.png)
-
Position Assembly tool T10009 with narrow slot - arrow - onto torsion spring - 1 -.
-
Press down outer sleeve of Assembly tool T10009 until it makes contact on mount - 1 -.
Assembly tool T10009 is depicted with a cut-out section to clarify following assembly steps.
-
Turn Assembly tool T10009 180 ° toward right until slot - arrow - points toward front.
-
Press down center rod - 1 - of Assembly tool T10009 . Doing this compresses torsion spring.
