Cabrio GLX L4-2.0L (ABA) (2001)
Brake Pad: Service and Repair
Front Brakes
Lucas/Girling Front Caliper
Component Notes And Information
NOTE:
^
During removal and installation procedures, refer to the component location illustration above and component notes below.
^
Separate connector for brake pad wear indicator.
^
When removing self locking bolts (14), counter hold guide bolts (17) using a suitable wrench
^
To prevent brake fluid spillage draw the brake fluid from the reservoir using a bleeder bottle that is used ONLY for brake fluid.
WARNING:
^
Brake fluid is poisonous and must NEVER be removed by siphoning with your mouth.
CAUTION:
^
After servicing caliper, depress brake pedal firmly several times to seat the pads in their normal operating position.
1
Screw
2
Brake pads
-
With pad wear indicator
-
Always replace both sides
-
Thickness: 14 mm (0.551 inch)
-
Wear limit: 7 mm (0.276 inch) including backing plate
3
Brake disc
-
Always replace all pads on one axle at the same time
-
Remove brake caliper before removing
-
Disc For Models With 4 Cylinder Engine:
Diameter: 256 mm (10.08 inch)
Thickness: 20 mm (0.787 inch)
Wear limit: 18 mm (0.709 inch)
-
Disc For Models With V6 Cylinder Engine:
Diameter: 280 mm (11.02 inch)
Thickness: 22 mm (0.866 inch)
Wear limit: 20 mm (0.787 inch)
4
Screw
5
Wheel hub
-
Replacement, refer to Steering and Suspension
6
ABS Wheel Speed Sensor Rotor
-
For models with ABS
7
Bolt