Cabrio GLX L4-2.0L (ABA) (2001)
14 - Clip
15 - Control cables
- When replacing, first remove cover -12-
16 - Central flap lever
17 - Temperature flap lever
18 - Footwell/defrost - flap lever
19 - Self-tapping screw
20 - Air distribution housing
- Do not disassemble further
21 - Wire clip
22 - Air duct connector
23 - Gasket
- Always replace
24 - Heater core
To install:
- Install seals around perimeter of heater core so there are no gaps, and glue in place.
- If heater core does not lock into place during installation, fasten to heater box using screws through tabs on top of heater core.
- Vacuum hose adaptor, installing -> Fig. 1
25 - Gasket
- Always replace
26 - Wire clip