Cabrio GLX L4-2.0L (ABA) (2001)
Mark on camshaft sprocket must align with arrow on toothed belt guard.
-
Adjust shaft seating tappet of oil pump parallel to crankshaft.
NOTE: When installing, turn rotor arm slightly right of the distributor marking. When inserting the rotor arm will turn back towards the marking.
-
Insert distributor so that rotor arm points to No. 1 cylinder mark on distributor body.
-
Tighten distributor securing bolt.
-
Tightening torque: 25 Nm
-
Before installing, clean distributor cap and check for cracks and signs of tracking, replace if necessary.
-
Check basic setting of distributor.