Cabrio GLX L4-2.0L (ABA) (2001)
Fig. 5 - Wheel Bearing, Pressing Out Of Wheel Bearing Housing
Fig. 6 - Lubricating inner surface of wheel bearing housing
-
Coat completely with MoS2 grease.
Fig. 7 - Wheel Bearing, Pressing Into Wheel Bearing Housing
Fig. 8 - Wheel Hub, Pressing Into Wheel Bearing
Front Suspension Strut, Servicing
Suspension strut, servicing
Front
NOTE:
-
From m.y. 1995 the suspension strut for vehicles with Plus suspension (6 cyl.) is also installed in vehicles with Base suspension (4 cyl.).