Cabrio GLX L4-2.0L (ABA) (2001)
Fig. 6 Valve body, identification
Code letters are stamped on a metal tab. Metal tab must remain on valve body.
Application, valve body/transmission.
Fig. 7 Operating rod, installing (hooking onto) manual selector valve
-
Turn manual selector valve -1-so shoulder faces operating rod.
-
Guide operating rod -2- with manual selector in valve body.
Fig. 8 Operating rod, manual selector valve, adjusting
-
Move selector shaft to "P".
-
Push operating rod with manual selector valve in valve body to stop (direction of arrow) and tighten bolt to 4 Nm (35 inch lbs.).
Note:
^
Manual selector valve must always be resting against stop. Counter-hold in direction of arrow when tightening bolt.
^
Always replace bolt and manual selector valve retaining clip.
Fig. 9 Valve body, installing
-
Route conductor strip as illustrated, ensure it does not kink or twist when installing.