Cabrio GLX L4-2.0L (ABA) (2001)
Clutch Cable: Service and Repair
Clutch cable, removing and installing
(5-Speed Manual Transmission 020)
When the clutch cable is removed and installed, the adjusting mechanism must be tensioned using the same retaining strap used to compress the
adjusting mechanism of a new cable. The strap is included with a new cable.
-
Remove retaining strap from new cable by carefully cutting eyelet open at perforation (arrow).
Removing
CAUTION!
Do not kink the clutch cable, otherwise the adjusting mechanism may not function properly.
-
Depress clutch pedal down to stop at least 5 times.
-
Attach retaining strap so that eyelet (arrow -1-) is above protective boot.
-
Compress adjusting mechanism in area of protective boot.