Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
The security code/serial number sticker for remanufactured replacement radios comes in the box with the new radio, Place the new sticker over the old
sticker on the radio card.
^
switch radio ON
^
radio plays and radio station frequency is displayed
^
push and hold AM/FM and SCAN buttons to activate coding procedure
^
radio display changes to CODE and then 1000
^
release AM/FM and SCAN buttons
^
1000 will remain on display
^
enter radio's security code using first four program station buttons
^
security code will appear on display
^
push and hold AM/FM and SCAN buttons once again until display changes to SAFE
Note
A new or remanufactured radio will only accept its factory assigned security code. If an incorrect code is entered, the radio display will not change to
SAFE.
^
release AM/FM and SCAN buttons
^
radio display changes to a radio station frequency
^
radio is now coded
Reactivating radio after reconnecting power
After disconnecting power (fuse, battery, etc.), the radio will lock up electronically.
To reactivate:
^
obtain radio's security code
^
located on radio card
^
switch radio ON
^
radio will not play
^
radio display shows SAFE
^
push and hold AM/FM and SCAN buttons
^
display changes to 1000
^
release AM/FM and SCAN buttons
^
1000 remains on display