Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
Sunroof / Moonroof: Service and Repair
Removing and Installing Sunroof Panel
Removing
- Tilt sunroof panel up.
- Insert special tool 3195 into sunroof opening.
- Pull headliner and tilting frame 1 down until special tool 2 engages headliner trim frame 3 (arrow A).
- Disengage headliner trim frame from guide rails by hitting special tool 3195 backwards with palm of hand (arrow B).
- Push back headliner trim frame until tool contacts edge of roof cutout.
- Remove special tool and manually push headliner trim frame to stop (arrow).
- Remove mounting screw 1 (Torx) and adjusting washers 2 from locating pins 3.
- Remove slide/tilt sunroof panel from above.
Installing
Sunroof panel operating mechanism must be in closed position before installing sunroof panel.