Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
/Page-426001.png)
Crankshaft Main Bearing Seal: Service and Repair
1.
On manual transmission models, remove transmission, flywheel, pressure plate, clutch disc and intermediate plate.
2.
On automatic transmission models, remove transmission, torque converter and torque converter drive plate.
3.
On except 5-131 engine, pry oil seal out of oil seal flange using a screwdriver or equivalent.
4.
On 5-131 engine, pry out oil seal using tool 2086 or equivalent.
5.
On all engines, lubricate new seal, center seal in seal flange and press until fully seated.
6.
Reverse procedure to complete installation.
