Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
/Page-1462001.png)
Evaporator Core: Service and Repair
Evaporator, Removal and Installation
- Remove Evaporator Case. See: Evaporator Case/Service and Repair
Disassembly
1
Upper evaporator housing
‹› Seal gooves and contact surfaces with silicone rubber sealant Part No. AKD 476 KD5 05 or equivalent
2
Fresh air blower series resistance with fuse - N24
3
Intake duct
‹› Glue seal to ensure water tight connection
4
Fresh air/recirculation flap vacuum servo
6
Air intake ring
7
Fresh air blower - V2
8
Lower evaporator housing
‹› Seal grooves and contact surfaces with silicone rubber sealant Part No. AKD 476 KD5 05 or equivalent
9
A/C evaporator temperature switch -E33- sensing tube
10 A/C evaporator temperature switch - E33
‹› Insert sensing tube of temperature switch into evaporator 330 mm (13.0 in.)
‹› Replaceable only with cover and insulation
‹› Prevents evaporator from freezing
