Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
‹› Not needed on vehicles with variable displacement, self regulating compressors (these compressors will not allow evaporator temperatures to
drop below freezing)
11 Retainging strap
‹› Replace with Part No. 191 820 845
12 Footwell vent
13 Evaporator water drain valve
‹› Install with lip facing down
‹› Remove and dirt or undercoating from valve
‹› Press fit onto lower evaporator housing (not glued)
14 Air distribution housing
‹› Flaps cannot be replaced individually
15 Seal (round)
‹› Must be water tight
16 Seal
‹› Must be water tight
17 Seal
‹› Must be water tight
18 Heater core
‹› If heater core is replaced drain entire cooling system and refill with new coolant