Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
Special Tools
The removal of the present fuel hose requires the use of a specially designed cutting tool. One cutting tool, # KL2298, will be shipped to you free of
charge prior to the initiation of this recall. Additional cutting tools can be ordered under ordering number TKL 229 80000 KL1 at a cost of $7.15 each.
Time Allowance
The time necessary to replace the fuel hose(s) clamps and fuel feed hose is:
G60 40 T.U.
VR6 70 T.U.
Campaign Authorization
In accordance with campaign procedures, Volkswagen United States, Inc. will mail notification letters including authorization forms to all known
owners. If a customer inquires about the recall campaign but does not present an authorization form, please confirm, by accessing the V-Crest system or
by contacting your Zone office, that the recall is applicable and, moreover, shows an open status before you commence work. If the recall is required,
please prepare a blank campaign authorization form W 42 002 3010 and mail it back to VWUS.
Retailer Obligation
It is imperative that you schedule appointments with your customers on a priority basis. Please provide a copy of this communication to every person in
your retail facility who has recall-related responsibilities.
Thank you for your cooperation.
Work Procedure - G60
Work Procedure - G60
-
Open hood.
-
Loosen gas cap to release fuel system pressure; re-tighten gas cap.
-
Remove air intake hose "A" by loosening clamps "B".